Edge Theory Labs Help Center logo
Edge Theory Labs Help Center logo

All articles

Deep Cleaning Your TubUpdated 3 months ago

Every 3-6 Months it is recommended to deep clean your tub. The steps below will guide you through a deep clean of your Edge Tub.

  1. Drain the Tub and Chiller completely - leave no water in the machine, hoses, or bottom of the tub

  2. Throw away any water filters that were previously used, and throw away or disinfect any accessories that you may be using in the tub (such as a cushion or floating thermometer)

  3. Dry the tub with a towel (note that some residue may transfer, so an old towel is recommended).

  4. Scrub the tub with a Mr.Clean Magic Eraser. Wipe down with a clean, damp cloth.

  5. Spray the tub with an all-purpose cleaner. Wipe down with a clean, damp cloth.

  6. Dry the tub with a clean, damp cloth.

  7. Fill the tub and add the start-up dose of solutions.

  8. Open the valves and power on your chiller

If you have any questions, don’t hesitate to reach out to our support team for further assistance!

Was this article helpful?
Yes
No