Step 1) Unbox your Tub. When choosing your location, select a flat and smooth surface, with a water source within accessible range. Remove the Edge Tub Core from the shipping carton, and remove the protective wrapping. Remove the Storage Strap and se

Step 1) Unbox your TubWhen choosing your location, select a flat and smooth surface, with a water source within accessible range. Remove the&#xA0;Edge Tub Core&#xA0;from the shipping carton, and remove the protective wrapping. Remove the&#xA0;Storage Strap&#xA0;and set it aside. Unfold the&#xA0;Tub&#xA0;in the desired orientation. Step 2) Install the&#xA0;Drain Plug or PVC Valve&#xA0;to the&#xA0;TubThe&#xA0;Drain Plug&#xA0;can be used if you do not care to direct the water flow when emptying the tub. The&#xA0;PVC Valve&#xA0;should be used if you want to direct water to a specific area by connecting to a garden hose. Screw the&#xA0;Drain Plug&#xA0;or the&#xA0;PVC Valve&#xA0;onto the&#xA0;Drain Fitting&#xA0;by rotating it clockwise until hand tight. Prior to installation, ensure that the o-ring is present at the base of the threads. Do not tighten with tools. The&#xA0;PVC Valve&#xA0;should be oriented so that the valve handle is in an accessible position. Step 3) Inflate the&#xA0;TubOpen the&#xA0;Inflation Valve Cap&#xA0;on the&#xA0;Tub&#xA0;by rotating counterclockwise. When inflating the&#xA0;Tub, check to ensure that the&#xA0;Inflation Valve Pin&#xA0;is in the depressed (out) position or the air will be released after the&#xA0;Inflation Hose&#xA0;is detached.&#xA0;The&#xA0;Inflation Hose&#xA0;connects to the&#xA0;Inflation Valve&#xA0;with a quarter turn clockwise to attach. Inflate the&#xA0;Tub&#xA0;using the included&#xA0;Air Pump&#xA0;until the gauge reads 10 PSI. Do not over-inflate or product damage will occur. When done inflating, replace the&#xA0;Inflation Valve Cap&#xA0;with a clockwise turn. Step 4) Fill the&#xA0;Tub&#xA0;Check that the&#xA0;Drain Cap&#xA0;or&#xA0;PVC Valve&#xA0;is in place. If installed, ensure the&#xA0;PVC Valve&#xA0;is in the perpendicular &#x201C;closed&#x201D; position. The&#xA0;Tub&#xA0;can now be filled with water up to the &#x201C;Fill Level&#x201D; line. Overfilling may cause water to overflow from the&#xA0;Tub&#xA0;for some users, though you may fill to your preference.&#xA0; Step 5) Add IceNow that the tub is set up and filled up, ice can be added to the tub. The amount of ice needed will depend on the starting water temperature, but generally between 100-150 pounds will be needed depending on the desired temperature.&#xA0; Step 6) Cover your&#xA0;Tub&#xA0;Prior to use, the water can be treated with our water sanitizers to extend the useful life of the water. If water is intended to stay in the tub for multiple days, we highly recommend this step for water clarity and sanitation. The startup dose and water maintenance instructions can be found in the user manual. &#xA0;Finally, put the&#xA0;Cover&#xA0;on if the&#xA0;Tub&#xA0;will not be immediately used, and secure the four&#xA0;Locking Buckles. Note that the factory combination code for the&#xA0;Locking Buckles&#xA0;is 0-0.&#xA0;<a href="https://help.edgetheorylabs.com/en-US/setting-the-buckle-combination-243027" rel="noopener noreferrer" target="_blank">See instructions on how to change the combination code</a>. If you purchased the optional inflatable cover, follow the instructions in Step 3 to inflate the cover and then lock it.&#xA0; Enjoy your new Edge Tub Core! &#xA0; &#xA0;

Setting Up Your Edge Tub Core

The amount of ice required will depend on several factors including the starting temperature of the water, the ambient air temperature, and the desired water temperature. For easy estimation, we recommend that between 60-80 pounds to be used in colde

The amount of ice required will depend on several factors including the starting temperature of the water, the ambient air temperature, and the desired water temperature. For easy estimation, we recommend that between 60-80 pounds to be used in colder climates with cool water coming in, and 100 and 150 pounds of ice to be used in hotter climates with warm water going in.The amount of time that the water will stay cold will depend on several factors including the starting temperature of the water, the ambient air temperature, and how much use the cold tub is receiving. In general, more people going through the tub will speed up how quickly the water warms.

How Much Ice Do I Need For My Edge Tub Core?

Get in touch with our team for sales support, customer service, or partnership inquiries.

Edge Tub Core Setup

Setting Up Your Edge Tub Core

How Much Ice Do I Need For My Edge Tub Core?